Hot - air Pin Plate Stenter Machine with coating function  for cotton sorts and fiber textile

KZM-320 hot-air stenter & coating machine

Application:

This Machine is applicable for coating and drying the cotton,polyester cotton/chemical fiber and woven fabric. Advanced small circulation modular drying chamber (copy of Germany Montfort’s, free to assemble), infrared edge detection system. The whole machine is driven by AC frequency conversion transmission, and bridge control board equipped with TV monitoring devices.

Technical process flow

Open width feeding(electric edge suction) →coating head→ bridge type transmission case →infrared edge detection → pin plate → into 2-chamber drying →cold water roller cooling →  center rolling draw-out

Main technical Parameter:

1. Type: pin plate stenter
2. Machine direction: left or right hand (customer makes decision)
3. Machine speed: 25~80m/min
4. Machine nominal width: 3200mm
5. Modulation mode: Whole machine axes modulation, also each chamber manual modulation according to request
6. Design temperature: ax 220, with temperature self-control device
7. Resource of heat: heat-transfer oil
8. Rail: cast by 20# pig iron, oil drip lubrication rail and chain.
9. Cloth in and out method: open width in, centre rolling out
10. Transmission method: AC frequency synchronism transmission
11. Chamber qty and circulation fan qty: 2 chambers (3m each),4pcs×4KW circulation fan.
12. Main transmission power: 22kw.
13. Total power: 30kw (start power)

Machine structure:

1. Feeding frame: composed of feeding pipe,cloth tighten frame,electric edge suction,cloth guiding roller,channel steel frame etc.
2. Hot air small circulation blow head to head through air flue, air quantity of top and bottom air flue can be adjusted,2 building-block chambers.
3. Each chamber with one radator,2 circulation fans, driven by high-temperature-resistance motor.
4. Filtering network in front of radiator, easy for cleaning after stopping, improving the heat efficiency.
5. Main transmission and rail system: feeding in and out lengthening rail, 7.5KW AC motor drives spline shaft, drive chain through worm gear case, pin plate or clip through steel structure rail, stable running, chain with constant-tension device. Rail modulation collective drive, both ends of chamber has solely micromatic setting.
6. Cooling and doffing system: cold air cooling and cold water roller cooling, rolling feeding out.

Basic configuration:

open width feeding in                     1set

coating machine                            1set

Cooling machine                            1set

center rolling device                       1set

customer self-care parts:

1. Water, steam pipeline and boiler.
2. 5.88×105 Pa compressed air.

3. Air hose from top door plank to exhaust fan and overboard air hose.

4. Feed cable from electric control cabinet to overboard.

Professional blade for coating machine

Description:

1. This machine is suitable for various sorts of cotton and fiber textile to process the technology treatment as knife coating, drying, forming and tape packaging in order to various categories textile coating product.

2. We use professional in lay tungsten carbide coating machine knives

A: sharp knife     B: square mouth         C: drip-drop D: J-knife

E: half-tubular        F: comma erasing knife    G: crescent   H: elbow